检测工业门
是的目的，由金道尔门业来告诉大家，这是为了减少损失，检查偏差及螺丝松紧、检查皮带松紧、检查控制器是否有效、检查电机的油污，灰尘、检查各部件的磨损情况，开关门速度情况、检查电压是否正常、我们必须要注意定期保养与维护，这些检查都是为了避免使用过程中发生问题。
Detection of industrial door yes purpose by Jin Daoer door to tell you that this is in order to reduce the loss, check the deviation and the tightness of screws, check belt release, check whether the controller is effective, to check the motor oil, dust, check the wear condition of parts, open closed speed situation, check whether the voltage is normal, we must pay attention to regular maintenance and maintenance, these checks are to avoid problems in use process.
长期缺乏保养，会导致存在隐患及小故障。得到不到好的处理，马达得到运行电流后做正向运行，将动力传给同步带，由同步带传给吊具系统使门扇开启；门扇开启后由控制器作出判断，如需关门，通知马达作反向运动，关闭门扇。这些问题要是不及时处理的话，故障将由小变大，最终导致电动门的瘫痪。
If industry long-term lack of maintenance, can lead to exist hidden dangers and glitches. Won't get good treatment, the motor get do after running current is running, the power to the synchronous belt, by synchronous belt to sling system make the doors open; By the controller to determine after doors open, if you want to close the door, inform the motor for inverse kinematics, close the door leaf. These problems if not handled in time, the fault will be changed from small to big, eventually leading to electric door paralysis.